Worldwide Shipping
8A31-54-1110 Komatsu Cushion Damper
Exact Fit Guarantee
This part is guaranteed to fit your machine.
Wrong Part?
We'll overnight correct part at no cost to you.
Description for 8A31-54-1110 Mount-rubber
▶Specification for 8A31-54-1110 Mount-rubber
▶| Models | D31EX, D31PX, D37EX, D37PX, D39EX, D39PX, D51EX/PX, D61EX, D61EXI, D61PX, D61PXI, D65EX, D65PX, D65WX, D85EX, D85PX |
|---|---|
| Dimensions | 9.06x9.06x9.06 |
-
At the beginning, I experienced significant delays and communication issues regarding my order, which honestly caused serious concern because the parts were urgently needed for an important project.
However, after continuous follow-up, the Propel Parts team handled the matter professionally, provided shipment tracking, and the parts finally arrived successfully.
I especially appreciate their willingness to communicate, acknowledge the issue, and continue working toward resolving the situation.
In international business, delays can sometimes happen, but what matters is the final commitment to resolving the issue properly.
Thank you to Daniel and the team, and hopefully future transactions will be smoother for both sides. -
Tiene una buena atención y servicio
-
Great customer service.
Prompt , knowledgeable and friendly service. -
Stevens the man. Placed my order and sent him the order # and had me in the loop within an hour.
-
La mejor experiencia y calidad
Frequently Asked Questions
What is the function of the 8A31-54-1110 cushion damper?
The 8A31-54-1110 cushion damper is a shock-absorbing component used in Komatsu heavy equipment to reduce vibration and impact loads transmitted through the machine’s structure or cab mounts. It helps protect components and improve machine stability, operator comfort, and overall equipment longevity.
How do I install the 8A31-54-1110 cushion damper?
Here’s a general guide for proper installation:
- Park the machine on a level surface and turn off the engine.
- Support the machine or cab to relieve load on the existing cushion damper.
- Remove any fasteners or mounts holding the old damper in place.
- Carefully extract the worn damper and clean the mounting points.
- Position the new 8A31-54-1110 cushion damper and secure it with the correct hardware, tightening to the torque values specified in the service manual.
- Lower the supported assembly and verify stability and fit.
Which machines use the 8A31-54-1110 cushion damper?
The 8A31-54-1110 cushion damper fits a wide range of Komatsu dozers and construction machines, including models such as D31EX, D31PX, D37EX/PX, D39EX/PX, D51EX/PX, D61EX/EXI/PX/PXI, D65EX/PX/WX, D85EX/PX and more where this part number is specified. If you are unsure don’t hesitate to reach out to Propel Parts for help verifying fitment.
Does the 8A31-54-1110 cushion damper meet performance expectations?
Yes, the 8A31-54-1110 cushion damper is manufactured to meet or exceed OEM quality and performance standards for durability, shock absorption, and fit. Aftermarket versions are quality-checked to ensure they match the fit and function of the original Komatsu part.
How often should a cushion damper like the 8A31-54-1110 be inspected or replaced?
Cushion dampers should be checked during routine maintenance or when related assemblies are serviced. Inspect for signs of wear, cracking, deformation, or loss of damping ability. Replace the damper if any of these issues are found to maintain proper vibration control and operator comfort.
What are common signs that the 8A31-54-1110 cushion damper needs replacement?
Typical indicators include:
- Excessive vibration or shaking during operation
- Unusual noise from the mount or damper area
- Visible damage such as cracks or deformed rubber/metal components
- Loose or worn mounting hardware
Why is using a quality cushion damper like the 8A31-54-1110 important for equipment performance?
A quality cushion damper helps absorb shock and vibration, which improves operator comfort, protects structural components, and reduces wear on sensitive parts. Using parts that meet or exceed OEM expectations enhances reliability, reduces maintenance issues, and increases machine uptime.
This 8A31-54-1110 Mount-rubber is compatible with the following models:
D31EX, D31PX, D37EX, D37PX, D39EX, D39PX, D51EX/PX, D61EX, D61EXI, D61PX, D61PXI, D65EX, D65PX, D65WX, D85EX, D85PX & more...
Shipping
We know equipment downtime costs money, so fast and reliable shipping is a priority at Propel Parts. Orders placed on weekdays before 3:00 PM ET typically ship the same day, with expedited delivery options available for many locations when time is critical.
We ship across the U.S., Canada, and over 130 countries worldwide, helping customers keep machines running wherever they operate. Available shipping methods and delivery estimates are shown at checkout so you can select the option that best fits your timeline.
Tracking information is emailed within 24–48 hours after your order is processed, giving you full visibility from dispatch to delivery and peace of mind that your parts are on the way.
Easy Returns
Our refund policy is simple. We offer a 30-day, no-hassle return policy, and we make every effort to provide the best service and highest-quality parts possible. If you’re not fully satisfied with your purchase, you may return it within 30 days for a refund. Full details are available on our Returns Policy page.
Warranty
Buy with confidence. All parts from Propel Parts are covered against material or manufacturer defects for 12 months from the original invoice date. We stand behind every part we sell, so you can count on reliable performance and dependable support. Full details are available on our Warranty Policy page.
Exact Fit Guarantee®
The right part — or we'll make it right.
Order Normally
Know your part number? Simply place your order.
Not Sure?
Place your order, then send us your serial number before it ships.
We'll verify fit.
We Make It Right
Wrong part? We'll make it right.Fast. At our expense.
1 YEAR UNLIMITED WARRANTY
ORDER BY 3PM EST. EXCL. WEEKEND
NO CORE OR EXCHANGE CHARGES
EASY RETURNS & FAST REFUNDS
