New 9N0869 Washer-Hard 8.8X2 Replacement suitable for Caterpillar Equipment
- New Washer-Hard 8.8X2 Replacement suitable for Caterpillar Equipment
- Made to USA Specification
Buy with Confidence: All parts are covered by our warranty
Exact Fit Guarantee
This part is guaranteed to fit your machine.
Wrong Part?
We'll overnight correct part at no cost to you.
Description for 9N0869 Washer
â–¶Specification for 9N0869 Washer
â–¶Exact Fit Guarantee for 9N0869 Washer
â–¶| Dimensions | 1.00x1.00x0.08 |
|---|
-
The Double Order Catastrophe
My co-worker placed an order and wasn't sure it went through online. I later placed the same order thinking the previous order didn't go through. To my surprise both orders went through, and I needed to cancel one of the orders. I called and spoke with someone who instructed me someone would contact me about the situation. I was contacted by Misty and she said she would do her best to cancel one of the orders but not sure if she could because they were next day orders. A small tome later I received an email saying she was able to cancel one of the orders. Thank you to Misty and the entire Propel Parts Team. Greatly appreciated!! -
When I had questions, they were answered quickly and kindly.
Thank you!! -
Excellent service and very very good service
-
Science I buy parts from propel parts I don’t have to spend too much down time always on time and good service
-
Having issue running my credit card, Steven was more than helpful to send me a payment link to complete my transaction!
Frequently Asked Questions
What is the Caterpillar Hard Washer 9N0869 used for?
The 9N0869 is a hardened washer used in Caterpillar equipment assemblies to distribute clamping load over a wider area, prevent fastener heads from pulling through softer materials, and reduce surface wear under bolt heads and nut faces. Hard washers are essential in high-torque applications where standard washers would deform under load.
What are the dimensions of the 9N0869 washer?
The part number designation (8.8x2) refers to specific dimensional specifications for this washer. For exact inner diameter, outer diameter, and thickness measurements, refer to the product page or your Caterpillar parts manual to ensure you are ordering the correct washer for your application.
Why use a hardened washer instead of a standard washer?
Hardened washers are used in applications where fastener load concentrations are high. A standard soft washer would embed into the surface material or deform under torque, reducing clamping force over time. Hardened washers maintain their geometry under load, preserving joint integrity throughout the service life of the assembly.
Is this a high-quality aftermarket replacement washer?
Yes. The 9N0869 washer from Propel Parts is a premium aftermarket component that meets or exceeds OEM specifications for hardness rating, dimensional accuracy, and surface finish. It provides the same clamping performance as the original Caterpillar washer.
Which Caterpillar machines use the 9N0869 Hard Washer?
This washer is used across a variety of Caterpillar equipment. If you are unsure whether this washer fits your specific application, don't hesitate to reach out to Propel Parts for help verifying fitment.
Should hard washers be reused after removal?
Hard washers in good condition without deformation, corrosion, or visible wear can generally be reused. However, in safety-critical joints, it is best practice to replace washers along with bolts and nuts during a rebuild. Always inspect for proper flatness and surface condition before reuse.
Where can I find more Caterpillar hardware components?
Propel Parts carries a wide range of fasteners and hardware for Caterpillar equipment. Browse the full selection of heavy equipment hardware parts including washers, bolts, nuts, pins, and studs to support any maintenance or rebuild project.

We know equipment downtime costs money, so fast and reliable shipping is a priority at Propel Parts. Orders placed on weekdays before 3:00 PM ET typically ship the same day, with expedited delivery options available for many locations when time is critical.
We ship across the U.S., Canada, and over 130 countries worldwide, helping customers keep machines running wherever they operate. Available shipping methods and delivery estimates are shown at checkout so you can select the option that best fits your timeline.
Tracking information is emailed within 24–48 hours after your order is processed, giving you full visibility from dispatch to delivery and peace of mind that your parts are on the way.

Our refund policy is simple. We offer a 30-day, no-hassle return policy, and we make every effort to provide the best service and highest-quality parts possible. If you’re not fully satisfied with your purchase, you may return it within 30 days for a refund. Full details are available on our Returns Policy page.

Buy with confidence. All parts from Propel Parts are covered against material or manufacturer defects for 12 months from the original invoice date. We stand behind every part we sell, so you can count on reliable performance and dependable support. Full details are available on our Warranty Policy page.
Exact Fit Guarantee®
The right part — or we'll make it right.
Order Normally
Know your part number? Simply place your order.
Not Sure?
Place your order, then send us your serial number before it ships.
We'll verify fit.We Make It Right
Wrong part? We'll make it right.Fast. At our expense.
Worldwide Shipping






































