New 3467515 Lifter As Replacement suitable for Caterpillar Equipment
- New Lifter As Replacement suitable for Caterpillar Equipment
- Made to USA Specification
Buy with Confidence: All parts are covered by our warranty
Exact Fit Guarantee
This part is guaranteed to fit your machine.
Wrong Part?
We'll overnight correct part at no cost to you.
Description for 3467515 Lifter
â–¶Specification for 3467515 Lifter
â–¶Exact Fit Guarantee for 3467515 Lifter
â–¶| Models | 3508, 3512, 3516, G3508, G3512, G3512E, G3516 |
|---|---|
| Dimensions | 2.17x2.17x7.09 |
-
The Double Order Catastrophe
My co-worker placed an order and wasn't sure it went through online. I later placed the same order thinking the previous order didn't go through. To my surprise both orders went through, and I needed to cancel one of the orders. I called and spoke with someone who instructed me someone would contact me about the situation. I was contacted by Misty and she said she would do her best to cancel one of the orders but not sure if she could because they were next day orders. A small tome later I received an email saying she was able to cancel one of the orders. Thank you to Misty and the entire Propel Parts Team. Greatly appreciated!! -
The customer care response was very awesome. It was more than what I expected
The customer care response was very effective and timely
The response time was amazing
The availability of most of the parts that I wanted was also very awesome
Thanks keep it up -
Online order.
I had a good experience this morning I placed an online order and everything went smoothly. The staff at propel parts has always been helpful in the past when I have been looking for harder to find parts or something that wasn’t listed online. -
Propel parts is a very reliable parts source for heavy equipment
Quick response,good quality parts,favourable prices and always deliver on time -
Very knowledgeable and quick to quote parts.
Very quick to respond to parts quotes. Knowledgeable and Polite, and very quick shipping. Definitely will purchase parts from these guys in the future.
Frequently Asked Questions
What is the 3467515 valvetrain component used for?
The 3467515 controls flow or follows the camshaft within the valvetrain, supporting accurate timing and sealing. Its condition affects performance and efficiency directly.
How do I install the 3467515 valvetrain component?
Fitting the 3467515 correctly comes down to clean surfaces and following the manual sequence. Work through these steps:
- Shut down and cool the engine, then follow safe procedures
- Access the valvetrain and remove the worn component
- Inspect the seat, guide, and mating parts for wear
- Fit the 3467515 with the correct orientation and clearance
- Set lash or clearance to spec and confirm smooth operation
Which Caterpillar machines is the 3467515 compatible with?
The 3467515 valvetrain component is used across many Caterpillar applications, but the correct fit depends on your exact model and assembly. Always cross-check fitment using your service manual or part reference guide before ordering. Check your manual or reach out to Propel Parts for help verifying fitment.
Does the 3467515 valvetrain component meet performance standards?
Yes. The 3467515 is built to meet OEM specifications for fit, strength, and service life. When replacing, choose genuine or high-quality aftermarket parts that meet or exceed OEM specifications to keep the assembly protected.
How often should the 3467515 be replaced?
Service life for the 3467515 depends on operating conditions and load. Replace it on inspection findings or at the interval your manual specifies rather than waiting for a failure.
What are the signs of a worn or failing 3467515 valvetrain component?
When the 3467515 reaches the end of its service life, the symptoms tend to show up first as performance or wear issues. Look for:
- Ticking or tapping from the valvetrain
- Rough idle or reduced performance
- Compression loss or burning
- Excessive or uneven valve clearance
Why is the 3467515 important, and what related parts work with it?
Replacing the 3467515 when needed keeps the system within its designed clearances and loads, which extends the life of the surrounding parts and supports dependable performance. Related hardware on our site includes 7H7658 Spring and 4371409 Seal Liner.
This 3467515 Lifter is compatible with the following models:
3508, 3512, 3516, G3508, G3512, G3512E, G3516 & more...

We know equipment downtime costs money, so fast and reliable shipping is a priority at Propel Parts. Orders placed on weekdays before 3:00 PM ET typically ship the same day, with expedited delivery options available for many locations when time is critical.
We ship across the U.S., Canada, and over 130 countries worldwide, helping customers keep machines running wherever they operate. Available shipping methods and delivery estimates are shown at checkout so you can select the option that best fits your timeline.
Tracking information is emailed within 24–48 hours after your order is processed, giving you full visibility from dispatch to delivery and peace of mind that your parts are on the way.

Our refund policy is simple. We offer a 30-day, no-hassle return policy, and we make every effort to provide the best service and highest-quality parts possible. If you’re not fully satisfied with your purchase, you may return it within 30 days for a refund. Full details are available on our Returns Policy page.

Buy with confidence. All parts from Propel Parts are covered against material or manufacturer defects for 12 months from the original invoice date. We stand behind every part we sell, so you can count on reliable performance and dependable support. Full details are available on our Warranty Policy page.
Exact Fit Guarantee®
The right part — or we'll make it right.
Order Normally
Know your part number? Simply place your order.
Not Sure?
Place your order, then send us your serial number before it ships.
We'll verify fit.We Make It Right
Wrong part? We'll make it right.Fast. At our expense.
Worldwide Shipping




