2795267 Insert for CAT 120M, 120M 2, 12M & more

The 2795267 insert is a replaceable wear component designed to protect mating surfaces or housings from abrasion and impact. It helps extend the life of the assembly by taking wear in place of more expensive structural parts.

The 2795267 is a precision-machined insert used in Caterpillar equipment assemblies to provide a hardened or reinforced seating surface within a softer housing or bore. For related engine components, visit our heavy equipment engine parts category.

Here’s a general guide for proper installation:

1. Turn off the machine and ensure it is safely supported before beginning.
2. Remove any components or fasteners blocking access to the wear area.
3. Extract the old insert carefully without damaging the bore or surrounding surfaces.
4. Clean the seating area thoroughly to remove debris, rust, or old material.
5. Position the new 2795267 insert into place, ensuring it seats squarely and aligns correctly.
6. Secure the insert with the appropriate hardware or press fit per the service manual.

Replace the 2795267 when you observe:

• Recession below the flush surface (for valve seat inserts)
• Cracking, chipping, or pitting of the insert face
• Loss of sealing or compression in the associated cylinder
• Thread damage in the case of threaded inserts

The 2795267 insert is used in assemblies where a replaceable wear surface is required, such as housings, linkages, or guide surfaces on heavy equipment. Compatibility depends on your machine’s design, so verify fitment using your equipment’s service documentation before ordering. If you are unsure don’t hesitate to reach out to Propel Parts for help verifying fitment.

Insert fitment is determined by outer diameter, seating depth, and face angle. For related hardware components, browse our Caterpillar hardware components. Always verify the part number against your service documentation.

Yes, the 2795267 insert is engineered to meet or exceed OEM specifications for material strength and wear resistance. When replacing wear components, choose genuine or high‑quality aftermarket parts that meet or exceed OEM expectations to help ensure dependable performance and long service life.

Insert installation typically requires a dedicated installation driver and an arbor press to drive the insert into the bore with the correct interference fit. Never hammer an insert directly. Chill the insert before pressing to shrink it slightly for easier installation.

Inserts should be checked during regular maintenance or whenever the assembly is disassembled. Inspect the insert for signs of wear, deformation, or loss of material. Replace it if wear is significant to help protect the structural components that rely on it.

Yes ??? the 2795267 is a premium aftermarket insert manufactured to meet or exceed OEM specifications for hardness, dimensional accuracy, and metallurgical composition.

Typical indicators include:

1. Excessive wear or thinning of the insert surface
2. Change in part fit or movement of mating components
3. Grooving, cracking, or surface deformation
4. Increased noise or vibration in the assembly

Generally, no. Once an insert has been pressed out of its bore, the interference fit is compromised. Reinstalling a used insert risks it working loose during engine operation, which can cause catastrophic damage.

A quality insert helps protect more expensive machine parts by absorbing wear and reducing stress on surrounding components. Using genuine or high‑quality aftermarket parts that meet or exceed OEM expectations supports reliable protection, lowers maintenance costs, and contributes to long‑term durability of your equipment.

Propel Parts covers the 2795267 with a 12-month unlimited mileage warranty from the invoice date. Same-day shipping is available for weekday orders before 3:00 PM ET. Worldwide shipping is available.