Worldwide Shipping
New 9M0057 Gasket Replacement suitable for Caterpillar Equipment
- New Gasket Replacement suitable for Caterpillar Equipment
- Made to USA Specification
Buy with Confidence: All parts are covered by our warranty
Exact Fit Guarantee
This part is guaranteed to fit your machine.
Wrong Part?
We'll overnight correct part at no cost to you.
Description for 9M0057 Rubber Gasket
â–¶Specification for 9M0057 Rubber Gasket
â–¶Exact Fit Guarantee for 9M0057 Rubber Gasket
â–¶| Dimensions | 1.18x1.18x0.08 |
|---|
-
The Double Order Catastrophe
My co-worker placed an order and wasn't sure it went through online. I later placed the same order thinking the previous order didn't go through. To my surprise both orders went through, and I needed to cancel one of the orders. I called and spoke with someone who instructed me someone would contact me about the situation. I was contacted by Misty and she said she would do her best to cancel one of the orders but not sure if she could because they were next day orders. A small tome later I received an email saying she was able to cancel one of the orders. Thank you to Misty and the entire Propel Parts Team. Greatly appreciated!! -
They went above and beyond to make sure my order was right. Thanks again
-
Great customer service.
Prompt , knowledgeable and friendly service. -
BEST for Heavy Equipment Parts.
Awesome quality products! Better customer service! Steven is always a pleasure to work with and very prompt in assisting me - thank you! -
Good Stuff.
We have had a couple shipping issues, but each time they made it right and we ended up getting what we need. Quality parts at half the price of OEM.
Frequently Asked Questions
What is the 9M0057 gasket used for?
The 9M0057 gasket seals the joint between two mating surfaces, holding pressure and preventing fluid or gas leaks. A flat, intact gasket is essential to a leak-free assembly.
How do I install the 9M0057 gasket?
Fitting the 9M0057 correctly comes down to clean surfaces and following the manual’s sequence. Work through these steps:
- Shut down, cool, and depressurize the assembly before opening it
- Remove the old gasket and scrape the surfaces fully clean
- Inspect both faces for warping, pitting, or scoring
- Position the new 9M0057 so all ports and bolt holes line up
- Torque the fasteners in the correct sequence and re-check for leaks
Which Caterpillar machines is the 9M0057 compatible with?
The 9M0057 gasket is used across many Caterpillar applications, but the correct fit depends on your exact model and assembly. Always cross-check fitment using your service manual or part reference guide before ordering. Check your manual or reach out to Propel Parts for help verifying fitment.
Does the 9M0057 gasket meet performance standards?
Yes. The 9M0057 is built to meet OEM specifications for fit, strength, and service life. When replacing, choose genuine or high-quality aftermarket parts that meet or exceed OEM specifications to keep the assembly protected.
How often should the 9M0057 be replaced?
Service life for the 9M0057 depends on operating conditions and load. Replace it on inspection findings or at the interval your manual specifies rather than waiting for a failure. This part is commonly replaced alongside the 8P2022 Ring Seal, so it is worth checking both while the assembly is open.
What are the signs of a worn or failing 9M0057 gasket?
When the 9M0057 reaches the end of its service life, the symptoms tend to show up first as performance or wear issues. Look for:
- External leaks at the mating joint
- Loss of pressure or compression
- Coolant, oil, or gas cross-contamination
- A crushed, blown, or hardened gasket on inspection
Why is the 9M0057 gasket important, and what related part is commonly replaced with it?
Replacing the 9M0057 when needed keeps the system within its designed clearances and loads, which extends the life of the surrounding parts and supports dependable performance. The 2D6392 Seal O-Ring is commonly serviced together with this part, so it is worth replacing both while access is available.
Shipping
We know equipment downtime costs money, so fast and reliable shipping is a priority at Propel Parts. Orders placed on weekdays before 3:00 PM ET typically ship the same day, with expedited delivery options available for many locations when time is critical.
We ship across the U.S., Canada, and over 130 countries worldwide, helping customers keep machines running wherever they operate. Available shipping methods and delivery estimates are shown at checkout so you can select the option that best fits your timeline.
Tracking information is emailed within 24–48 hours after your order is processed, giving you full visibility from dispatch to delivery and peace of mind that your parts are on the way.
Easy Returns
Our refund policy is simple. We offer a 30-day, no-hassle return policy, and we make every effort to provide the best service and highest-quality parts possible. If you’re not fully satisfied with your purchase, you may return it within 30 days for a refund. Full details are available on our Returns Policy page.
Warranty
Buy with confidence. All parts from Propel Parts are covered against material or manufacturer defects for 12 months from the original invoice date. We stand behind every part we sell, so you can count on reliable performance and dependable support. Full details are available on our Warranty Policy page.
Exact Fit Guarantee®
The right part — or we'll make it right.
Order Normally
Know your part number? Simply place your order.
Not Sure?
Place your order, then send us your serial number before it ships.
We'll verify fit.
We Make It Right
Wrong part? We'll make it right.Fast. At our expense.
1 YEAR UNLIMITED WARRANTY
ORDER BY 3PM EST. EXCL. WEEKEND
NO CORE OR EXCHANGE CHARGES
EASY RETURNS & FAST REFUNDS
