6245-81-6360 V-Belt for Komatsu Equipment

The 569‑63‑22880 bushing is a durable wear component used in Komatsu heavy machinery to provide a smooth bearing surface for pins, shafts, or pivot points. It helps reduce friction, absorb mechanical load, and protect more expensive components from premature wear and tear.

Here’s a general guide:

1. Park the machine on level ground and shut off the engine.
2. Support the assembly (e.g., arm, axle, or linkage) to relieve load on the bushing.
3. Remove retaining hardware and extract the worn bushing using a press or puller.
4. Clean the bore and mating surfaces of debris, rust, or grease.
5. Press the new 569‑63‑22880 bushing into place, making sure it sits squarely and flush.
6. Reassemble all components and verify smooth motion.

This bushing is compatible with a range of Komatsu heavy equipment, including articulated dump trucks, excavators, and loaders, where the 569‑63‑22880 part number is specified. It is commonly installed in axle mounts, suspension pivots, or linkage assemblies. If you are still unsure, reach out to Propel Parts, our team will be happy to help you verify if this part fits your equipment.

Yes. The 569‑63‑22880 bushing is manufactured to meet or exceed OEM quality standards, ensuring proper fit, durability, and wear resistance. It performs reliably under heavy load and harsh working conditions, maintaining smooth operation of Komatsu machinery.

Inspect bushings during routine machine maintenance, especially when servicing pivot points, linkages, or suspension assemblies. Look for signs of wear, looseness, or play. Replace the bushing if significant wear is detected, as worn bushings can accelerate damage to pins and housings.

Typical indicators include:

1. Excessive movement or play in pivot joints
2. Knocking, grinding, or unusual noises during operation
3. Visible grooves, flattening, or deformation on the bushing
4. Metal debris found in surrounding lubrication or housing areas

A quality bushing ensures smooth pivot motion, reduced friction, and proper load distribution. Using OEM-equivalent bushings improves machine stability, extends component life, and reduces downtime caused by premature wear.